Samsung S7562 Charging Ways Repair Solution

Samsung S7562 Charging Ways Repair Solution

Hardware method to solve Samsung S7562 Charging Problem. which is known to be one of the most successful phone of SamsungGalaxy range. 

Let�s have a look at most noted Samsung S7562 Charging Problem as well as their solution:

Problems:

• Phone not Charging.
• Showing �Charger Not Connected� error message.
• Phone heats up during charging.

Manual Solution

• Check with any other original Samsung Galaxy charger.
• Clean Charging connectors and check.

Hardware Solution for Galaxy S Duos S7562 Charging issue

• Clean dust on charging connector, you can do that simply with the help of a brush.
• If same problem replace charging connector and check.

• If same problem Check charging connector ways.

If you have further Questions please leave a comment.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.

download file now

Read More

Samsung Galaxy S duos S7562 WI FI Repair Solution

Samsung Galaxy S duos S7562 WI-FI Repair Solution

Following are the set of problems as well as solutions of Samsung Galaxy S Duos S7562 WI-FI problem.

Wi-fi Problems

• S Duos S7562 Network not found.
• Router not found.
• Data packets not transferring.
• Wi-Fi keeps on disconnecting.
• Weak signals.

Manual Solution

• Remove and reinsert battery and check.
• Toggle between WI�Fi ON & OFF settings.
• Reset Router.
• Software Update.
• Factory reset.

Hardware Solution

• Clean Wi-Fi antenna contact.

• Pull up pin of antenna contact and check.
• If same problem Gently heat Wi-Fi IC U204 & F202, if it still fails then replace it.

If you have further Questions please leave a comment.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.

download file now

Read More

Samsung Galaxy S4 I9500 Mic Problem Repair Ways Solution

Samsung Galaxy S4 I9500 Mic Problem Repair Ways Solution

Samsung Galaxy S4(I9500) is surely new in this market, but you can encounter problems with it due to any of the reasons. One of the most common problems faced by Samsung Galaxy S4 users is the microphone issue which normally arises due to water damage or moisture. In this type of problem you can hear the voice of others on call, while they are not able to hear you.

To solve this problem, all you have to do is to:

• Dry your Samsung Galaxy S4 with a tissue paper to eliminate any visible traces of water or moisture.
• Remove battery
• Clean all the openings (Headphone port, Charging port etc.) with the help of Cleaning Brush in order to eliminate all possible traces of water and moisture completely.

• Check MIC hole for any dust or dirt.

• Now try Microphone again, if it doesn�t work then open your Samsung Galaxy S4 and check the microphone rubber cap and clean it and check again.
•  If it is dislocated reinsert it again, if it is cut or damaged replace it and check.

• Check MIC and its Connector, replace if Faulty.

• Check the Mic track ways with a MultiMeter.

• Check U902 and gently heat it. Replace if necessary.

If you have further Questions please leave a comment.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You

download file now

Read More

Nokia 1202 Insert Sim IC prints damage Problem Solution Ways Jumpers 100 tested

Nokia 1202 Insert Sim IC prints damage Problem Solution Ways Jumpers 100% tested

todya i am going to post a vary usefull diagram that is helpfull in case if sim i.c is damage in nokia 1202 some time during jumper of sim ic in nokia 1202 the prints can be dameg with solder iron and in that case we became hope less that how to repair it.
                                  
now its is 100% tested solution and we do not need to worry simply loock at the diagram i am going to post and you can make just foure jumper and insert sim problem will be solve easily.all jumper and links are identified with differt colors so that you can understand easily.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

to get new repairing diagrams and applications with email �Enter your email address for RSS:� at the right side at top and press �subscribe�

download file now

Read More

C2 01 Nokia Keypad Not Working IC Jumper Ways Filter Problem Solution

C2-01 Nokia Keypad Not Working IC Jumper Ways Filter Problem Solution

This is Nokia C2-01 solution for not working keypads problem. This solution shows the connection line paths of the C2-01 keypad matrix including the EMI filter IC jumper ways. This may help for easy troubleshooting a keypad failure on the phone.

Just refer to the solution below and analyze how each certain keypad keys being connected. This solution may also help in bypassing the keypad EMI filter IC.

Nokia C2-01 Keypad Problem Repair Solution

Hints on Nokia C2-01 Keypad Malfunction Repairs:
1. Clean the keypad matrix including the keypad membrane.
2. Trace the connection line paths of a certain keys that doesnt work.
3. Check/replace the Keypads EMI filter IC or you can bypass it by applying a jumper wire on the open test point or spots as shown on the picture above. It will work too.

download file now

Read More